Midship
16-04-2004, 01:43 AM
Yesterday I decided to take out the cat and bandage up the manifold, another two budget mods that I think are very worth while, the car feels more responsive and sounds a lot better, id say engine bay temperature has also been reduced.
The de-cat was fairly simple, once the exhaust and sensors were removed, I went happy with a hammer and thin metal bar (see pic) I know it not as good as a race manifold/downpipe but its a dam site cheaper! I also wrapped the manifold with some imitation asbestos rope which is used to insulate steam pipes etc. This mod was an necessity on my beat because when I purchases it, the heat shield was missing, even if you have the heat shield I would still recommend it. The heat insulating rope to cover the manifold is available for demon tweeks or similar and isn’t too expensive.
The de-cat was fairly simple, once the exhaust and sensors were removed, I went happy with a hammer and thin metal bar (see pic) I know it not as good as a race manifold/downpipe but its a dam site cheaper! I also wrapped the manifold with some imitation asbestos rope which is used to insulate steam pipes etc. This mod was an necessity on my beat because when I purchases it, the heat shield was missing, even if you have the heat shield I would still recommend it. The heat insulating rope to cover the manifold is available for demon tweeks or similar and isn’t too expensive.