robertobini
27-05-2009, 02:35 PM
Now that a new ECU makes the Beat run sweetly up to 9000 revs, I am getting more fussy with smaller details.
I have a 120 W Gathers that works fine in all respects, apart from the output meters. When inserting or ejecting a cassette, they rotate beautifully, so I assume that the actual display is OK. However, after some initial twitching at switch on, both settle to the 0 position and do not move with the sound output.
Has anybody solved this problem?
Also I am about to install a compatible CD changer: where do you suggest I should run the cables? Round the door sills or the central tunnel?
Many thanks for any helpful input.
I have a 120 W Gathers that works fine in all respects, apart from the output meters. When inserting or ejecting a cassette, they rotate beautifully, so I assume that the actual display is OK. However, after some initial twitching at switch on, both settle to the 0 position and do not move with the sound output.
Has anybody solved this problem?
Also I am about to install a compatible CD changer: where do you suggest I should run the cables? Round the door sills or the central tunnel?
Many thanks for any helpful input.