PDA

View Full Version : Brake discs


beatc
12-03-2009, 08:09 PM
I'm having problems matching discs with the european part #'s I've seen on here.

If the rear-pads are Civic is it safe to assume the discs are Civic as well? (at least on the rear?)
Steve_M
13-03-2009, 01:36 PM
The Rear discs are a SR3 number which is a Civic number, For EU market and Canada its from a 1994-1997 civic 2dr (coupe), 3dr, 4dr. Japan built CRX. 4 door Japan built integra.

Front discs are 1985 era Jazz.
beatc
13-03-2009, 04:06 PM
Thank you very much .. so it looks like it's just the front setup which is mailorder from overseas.

That helps save a few bucks.
unclejemima
13-03-2009, 06:41 PM
The Rear discs are a SR3 number which is a Civic number, For EU market and Canada its from a 1994-1997 civic 2dr (coupe), 3dr, 4dr. Japan built CRX. 4 door Japan built integra.

Front discs are 1985 era Jazz.

Hey, good info! Thanks!!!
beatc
18-03-2009, 05:41 AM
Honda Acty TN looks like they might use the same pad.

Dorsetspares lists the APEC PAD610 as being compatible with the Acty as well as the City. Pictures suggest they are the same...might be easy to source in canada with all the mini-truck suppliers.

You have an Acty don't you uj?
unclejemima
19-03-2009, 03:02 AM
Honda Acty TN looks like they might use the same pad.

Dorsetspares lists the APEC PAD610 as being compatible with the Acty as well as the City. Pictures suggest they are the same...might be easy to source in canada with all the mini-truck suppliers.

You have an Acty don't you uj?

Yes, I have an Acty, and the parts are usually stocked somewhere in Vancouver area. Keep in mine the Acty has front disc's, but rear drums...so I'm assuming the front might swap to a beat?
I'll see if I can take a photo to compare...
beatc
24-03-2009, 05:13 AM
Confirmed for any Canadians that find this post in the future.

Rear-pads from CRX Si perfect match
Rear-discs from 92+ Civic perfect match

No problems with fitment.

Front pads seem impossible.

Front discs are possible with a 3mm hub-spacer .. might be cheaper to mail order. Unless your rotors are really bad they might be up for a machining. I just had mine machined to remove the rust from sitting and there's still enough meat left for another when the time comes. I replaced the rears because the replacements were so cheap it wasn't worth machining.
unclejemima
24-03-2009, 02:57 PM
Confirmed for any Canadians that find this post in the future.

Rear-pads from CRX Si perfect match
Rear-discs from 92+ Civic perfect match


Hey awesome! Do you have any part numbers?

What year CRX Si?
92+ Civic Hatch or Sedan?
beatc
24-03-2009, 04:01 PM
Rear disc: Raybestos 96544
Rear pads: AutoExtra AXMD374
unclejemima
25-03-2009, 11:20 PM
Rear disc: Raybestos 96544
Rear pads: AutoExtra AXMD374

copy, paste, save as! Thanks, I will hang on to this for when I have to do mine!
DavidStove
26-03-2009, 09:51 PM
My notes give 97 Rover 100 Metro front brakes, Rear Lokhead Part # VBD457 Brake Disk EH16621
Again EBC Pads DP529,
Any Help??
David