PDA

View Full Version : Parts Parts


upbeat
08-09-2008, 04:38 AM
Turns out I need Piston Rings, Connecting Rod Bearings and an Oil Pan Gasket.
Anyone know how the parts #s and how much I might have to pay?
(Need them in Canada) -Cheers
Also, if I get the Clarion CD cable from somewhere can I connect my IPOD to it? -dave
Steve_M
10-09-2008, 07:08 PM
Piston ringpart numbers wont be a problem.


Con rod bearing shells, you will need to get info off of your crank and rods to size them up. (I will dig out the info you need)

There is no oil pan gasket, its Honda Grey sealer used for nearly all engine block joints.
Steve_M
10-09-2008, 07:15 PM
This is the info you need to get from your engine parts to size bearings

http://www.manser42.freeserve.co.uk/Bearings_pub.pdf
upbeat
11-09-2008, 05:18 AM
I found out about no oil pan gasket but I didn't know about the different bearings. I ordered some from Japan and they asked me what colour?
So I told them either one. Hope I'm not in trouble.
Thanx much. -d
Steve_M
11-09-2008, 02:49 PM
There are 7 differant sizes to choose from.
upbeat
11-09-2008, 03:08 PM
Do you mean only one size fits ?
Steve_M
11-09-2008, 06:10 PM
Only 1 of the 7 sizes will be the correct size for your block/crank combination.

Others will either be too loose or too tight.
upbeat
15-09-2008, 11:19 PM
My motor is on the floor and here is the list of parts I apparently need:
-3 X standard ring set
-oil pick-up tube gasket
-clutch disk
-pressure plate
-throw-out bearing
-pilot bearing?
-rear main seal
-front crank seal


Spec.- connecting rod torque?
- main cap torque?

Does anyone have part #s or the specs?
Thanks much -dave
Steve_M
16-09-2008, 08:57 AM
http://www.u-ukhbc.co.uk/vbb/showthread.php?t=2620
Steve_M
16-09-2008, 09:06 AM
This should help.

Crank seals and oil tube gasket come in gasket set.
upbeat
16-09-2008, 01:25 PM
Yes that's a great help. I appreciate it very much. Have to get back on the road, can't afford to drive any other car for gas mileage. -d
upbeat
06-10-2008, 05:24 AM
Thanx for the help Steve got it together with new valve seals and clutch etc. man is she running good and no longer burning any oil.
Now it's true Love.
upbeat
20-11-2008, 06:00 PM
After 1000 miles the oil is still clear and not burning a drop.
I only wish it was already Spring.