buzzer

[hondzilla]

has any one tryed to use the buzzer for when your key is in the ignition for a light buzzer.
found out that the car has no buzzer for when you leave the lights on.

[adrianp]

I'm sure I've seen a write up for doing this somewhere...

But I think you should be able to get a kit that does the same thing for just a few quid (Well euros in your case...lol)

I'll have a look and post up if I find anything.

Ady.

[Steve_M]

its quite easy to do by adding in a relay.

here is the circuit before modifying.

[Steve_M]

And after, how you need to modify it.

you can find the wires you need at the ignition switch.

and the light switch feed at the plug for front fog lamps.

HTH

[adrianp]

Nice one Steve.

It's not the diagrams I was thinking of but are a lot clearer so should be better for people to use.

Ady.

EDIT:

Just added this to the How To section...

[Midship]

Nice tip, ive left them on more than once! Ill be carrying out this little modification :D

Cheers Steve!

[hondzilla]

thanks for the reply, can you tell me what kind of relay you have used for it.
maybe a picture?
i know you can buy those cheap beapers but because there is already on there i would like to use that one.
so far have been on time to put the lights out but there will be a time i will not.

[adrianp]

Any normal automotive relay should do, as long as the numbers on the base of it match the ones in the diagram you should be ok,

The easiest way would be to take the picture with you when you go to buy one, most will have the numbers on the packaging somewhere.

Ady.